This is a Century oil burner motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. There is a small piece that has cracked off the center piece on the backside of the motor. There are also some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Oil Burner Motor |
| Manufacturer Part Number | OL1032D |
| Mounting Type | C-Face |
| Motor Design | Capacitor-Start |
| Motor Enclosure Type | Open Drip Proof |
| Number of Speeds | 1 |
| Nameplate Horsepower @ 60 Hz | 1/3 hp |
| Nameplate RPM @ 60 Hz | 3,450 RPM |
| Frame Size | 48N |
| Body Diameter | 6.8 in |
| Nameplate Voltage @ 60 Hz | 115/230V AC |
| Full Load Amps @ 60 Hz | 4.2/2.1 A |
| Phase | Single |
| Motor Thermal Protection | Manual |
| Nameplate Service Factor @ 60 Hz | 1.35 |
| Shaft Diameter | 1/2 in |
| Shaft Length | 2 in |
| Motor Shaft Rotation | CW/CCW |
| Usable @ 208V | Not Usable at 208V |
| Bolt Circle Diameter | 7-1/4 in |
| Overall Length | 11-15/16 in |
| Ambient Temperature - Maximum | 40 °C |
| Insulation Class | B |
| Shaft Design | Flat |
| Flange Type | Non-Ventilated |
| Frame Material | Steel |
| Usable @ 200V | Not Usable at 200V |
| Frequency | 60 Hz |
| Sub Application | Oil Burner |
| Length Less Shaft | 9-15/16 in |
| Wattage | 250 W |
| Weight | 20 lb |
| Bearing Type | Sleeve |
| Duty | Continuous |