This is a Century condenser fan motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. The bolts are damaged/bent. There are also some cosmetic scuffs and scratches to the body of the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Condenser Fan Motor |
| Manufacturer Part Number | H767V1 |
| Motor Application | HVAC/R |
| Motor Sub Application | Condenser Fan |
| Motor Design | 3-Phase |
| Motor Enclosure Design | Open Air-Over |
| No. of Speeds | 1 |
| HP | 1-1/2 |
| Nameplate RPM | 1,140 |
| Voltage | 200-230/460V AC |
| Hz | 60 Hz |
| Full Load Amps | 5.1-5.0/2.5 A |
| Phase | Three |
| Duty Cycle | Continuous |
| Frame | 56Y |
| Output Watts | 1100 W |
| Usable @ 208V | Yes |
| Usable @ 200V | Yes |
| Motor Service Factor | 1 |
| Motor Thermal Protection | Auto |
| Ins. Class | B |
| Max. Ambient Temp. | 60 °C |
| Motor Shaft Rotation | CW/CCW |
| Motor Mounting Type | Stud |
| Motor Frame Material | Steel |
| Motor Mounting Position | Horizontal or Vertical Shaft Up |
| Shaft Length | 6-3/16 in |
| Lead Length | 6 in |
| Shaft Dia. | 5/8 in |
| Motor Bearings | Ball |
| Body Dia. | 6-5/8 in |
| Motor Flange Type | Ventilated |
| Motor Shaft Design | Keyed |
| Overall Length | 17 in |
| Length Less Shaft | 10-13/16 in |
| Weight | 35 lb |
| Mounting Stud Length | 1 in |
| Bolt Circle Dia. | 5-15/16 in |
| Stud Size | #10-32 |
| Nominal Efficiency | 80.6 % |
| Stud Quantity | 4 |
| Capacitor Required | No |