This is a Century belt drive motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Belt Drive Motor |
| Manufacturer Part Number | H718V1 |
| Application | Fan/Blower |
| Motor Design | Three-Phase |
| Motor Enclosure Type | Open Drip Proof |
| Number of Speeds | 2 |
| Horsepower | 1/2 hp; 1 hp |
| RPM | 1,725/1,140 RPM |
| Nameplate Voltage | 460VAC |
| Full Load Amps | 1.7/1.1 A |
| Phase | Three |
| Duty | Continuous |
| Frame Size | 56Y |
| Usable @ 208V | Not Usable at 208V |
| Usable @ 200V | Not Usable at 200V |
| Frequency | 60 Hz |
| Service Factor | 1.15 |
| Motor Thermal Protection | None |
| Insulation Class | B |
| Ambient Temperature - Maximum | 40 °C |
| Motor Shaft Rotation | CW/CCW |
| Mounting Type | Cradle Base; Stud |
| Mounting Position | All Angle |
| Frame Material | Steel |
| Shaft Diameter | 5/8 in |
| Shaft Length | 1-15/16 in |
| Shaft Design | Keyed |
| Bearing Type | Ball |
| Overall Length | 11-1/16 in |
| Length Less Shaft | 9-1/8 in |
| Body Diameter | 6.5 in |
| Weight | 25 lb |
| Mounting Stud Pattern | 4-1/8 in x 4-1/8 in |
| Ring to Ring Center | 8-5/8 in |
| Resilient Ring Diameter | 2-1/2 in |
| Nominal Efficiency | 70 % |