This Century FDL1056 direct drive fan and blower motor is a 1/2 HP, single-phase motor designed for residential and light commercial HVAC applications. Operating at 115V AC and 1075 RPM with 3-speed settings, this permanent split capacitor (PSC) motor features an open air over (OAO) enclosure, 48Y frame size, and reversible rotation (CW/CCW).
Inspection Details:
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand.
Defects Noted:Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Direct Drive Blower Motor |
| Manufacturer Part Number | FDL1056 |
| Mounting Type | Resilient Ring |
| Motor Design | Permanent Split Capacitor |
| Phase | Single |
| Nameplate Horsepower @ 60 Hz | 1/2 hp |
| Nameplate RPM @ 60 Hz | 1,075 RPM |
| Frame Size | 48Y |
| Nameplate Voltage @ 60 Hz | 115V AC |
| Full Load Current @ 60 Hz | 7.4 A |
| Motor Enclosure Type | Open Air Over |
| Motor Thermal Protection | Auto |
| Nameplate Service Factor @ 60 Hz | 1 |
| Body Diameter | 5.6 in |
| Usable @ 208V | Not Usable at 208V |
| Frequency | 60 Hz |
| Number of Speeds | 3 |
| Insulation Class | A |
| Motor Shaft Rotation | CW/CCW |
| Shaft Diameter | 1/2 in |
| Shaft Length | 6-1/2 in |
| Length Less Shaft | 6-1/8 in |
| Ambient Temperature - Maximum | 50 °C |
| Bearing Type | Ball |
| Overall Length | 12-1/16 in |
| Shaft Design | Flat |
| Product Type | Fan and Blower Motor |
| Weight | 17 lb |
| Number of Shafts | 1 |
| Usable @ 200V | Not Usable at 200V |
| Capacitor Required | Capacitor Not Included |
| Mounting Position | Horizontal |
| Sub Application | General Purpose |
| Frame Material | Steel |
| Mounting Stud Location | 4/Shaft End |
| Wattage | 370 W |
| Lead Length | 26 in |
| Number of Mounting Studs | 4 |
| Mounting Stud Thread Size | #8-32 |
| Ring to Ring Center | 5-11/16 in |
| Resilient Ring Diameter | 2-1/4 in |
| Mounting Stud Pattern | 3-5/8 in x 3-5/8 in |
| Application | Fan/Blower |