This is a Century condenser fan motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Condenser Fan Motor |
| Manufacturer Part Number | FB1076V1 |
| Motor Application | HVAC/R |
| Motor Sub Application | Condenser Fan |
| Motor Design | Permanent Split Capacitor |
| Motor Enclosure Design | Open Air-Over |
| No. of Speeds | 1 |
| HP | 3/4 |
| Nameplate RPM | 1,075 |
| Voltage | 208-230/460VAC |
| Hz | 60 Hz |
| Phase | Single |
| Full Load Amps | 5.0/2.5 A |
| Duty Cycle | Continuous |
| Frame | 48Y |
| Output Watts | 560 W |
| Usable @ 208V | Yes |
| Usable @ 200V | No |
| Motor Service Factor | 1 |
| Motor Thermal Protection | Auto |
| Ins. Class | B |
| Max. Ambient Temp. | 60 °C |
| Motor Shaft Rotation | CW/CCW |
| Motor Mounting Type | Cradle Base |
| Motor Frame Material | Steel |
| Motor Mounting Position | Vertical Shaft Up |
| Shaft Length | 6 in |
| Shaft Dia. | 1/2 in |
| Conduit Box Location | Interior |
| Motor Bearings | Ball |
| Body Dia. | 5-5/8 in |
| Motor Shaft Design | Flat |
| Overall Length | 13-3/4 in |
| Length Less Shaft | 8-3/4 in |
| Ring to Ring Center | 8-5/16 in |
| Weight | 27 lb |
| Resilient Ring Dia. | 2-1/4 in |
| Mounting Stud Length | 1-1/2 in |
| Stud Size | #8-32 |
| Mounting Stud Pattern | 3-5/8 in x 3-5/8 in |
| Nominal Efficiency | 69 % |
| Stud Quantity | 4 |