Canarm ALX150-DD100S 15-Inch Direct Drive Spun Aluminum Exhaust Fan
This Canarm ALX-DD series commercial exhauster features a corrosion-resistant spun aluminum housing and an aluminum backward-inclined wheel. Powered by a 1 HP motor operating at dual voltage (115/230V AC, 1 Phase, 60 Hz), it delivers up to 2,600 CFM of airflow. Ideal for rooftop or wall mounting in commercial buildings, factories, offices, and warehouses.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The fan spins when turned by hand.
Defects Noted:
Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Downblast Exhauster |
| For Air Type | Clean Air |
| Drive Type | Direct Drive |
| Wheel Diameter | 15 in |
| Exhaust Airflow @ 0.000 in SP | 2,600 cfm |
| Exhaust Airflow @ 0.250 in SP | 2,500 cfm |
| Exhaust Airflow @ 0.500 in SP | 2,400 cfm |
| Maximum Static Pressure | 1-1/2 in wc |
| Nameplate Voltage | 115/230V AC |
| Phase | 1 |
| Frequency | 50 Hz; 60 Hz |
| Power Source | Electric Corded |
| Electrical Connection | Wire Leads |
| Motor Horsepower | 1 hp |
| Motor Speed | 1,650 RPM |
| Speed Controllable | No |
| Number of Speeds | 1 |
| Motor Enclosure | Open Dripproof |
| High-Efficiency Motor | No |
| Wheel Type | Backward Inclined |
| Wheel Material | Aluminum |
| Housing Material | Aluminum |
| Housing Material Fabrication | Spun |
| Base Shape | Square |
| Base Length | 21 in |
| Base Width | 21 in |
| Overall Length | 31-1/4 in |
| Overall Width | 31-1/4 in |
| Overall Height | 23-1/8 in |
| Overall Diameter | 21 in |
| Mounting Location | Roof and Wall |
| Application | Commercial Buildings; Factories; Offices; Warehouses |
| Full Load Amps | 9.5/5.3-4.8 A |