This is a Bonomi electrically actuated butterfly valve. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to install the unit to fully test it. The top knob is broken off and will need to be replaced. There are also some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Electrically Actuated Butterfly Valve |
| Manufacturer Part Number | EN501S-002-8 |
| Body Material | Ductile Iron |
| Voltage | 24V AC/DC |
| Pipe Size | 8 in |
| Connection Type | Lug |
| Max. Pressure (CWP) | 250 psi |
| Max. Pressure (Steam) | 15 psi |
| Media Temp. Range | -30 °F to 250 °F |
| For Media | Air; Water |
| NSF Certifications for Food and Drinking Water | NSF 61 |
| 3-A Compliance | Not Rated |
| ANSI Flange Class | Class 150 |
| Bolt Holes | 8 |
| Vacuum Service Rating | Not Rated |
| Disc Material | Stainless Steel |
| Liner Material | EPDM |
| O-Ring Material | EPDM |
| NEMA Enclosure Rating | 4; 4X |
| IP Rating | IP67 |
| Valve Deactivated State | Normally Closed (NC) |
| Fail Safe Position | Fail Closed |
| Valve Series | EN501S |
| Input Control Signal | Manual |
| Disc Alignment | Concentric |
| Actuator Duty Cycle | 75 % |
| Actuator Electrical Entry | 1/2 in Conduit |
| Actuator Output Shaft Material | 416 Stainless Steel |
| Actuator Enclosure Material | Technopolymer |
| Lug Diameter | 8 in |
| Actuator Ambient Temperature - Minimum | -4 °F |
| Actuator Ambient Temperature - Maximum | 131 °F |