This is a Bell & Gossett hydronic circulating pump. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some cosmetic scuffs and scratches throughout the unit as well as some paint chipping. Please refer to the photos for more information.
This unit only includes what is photographed in the listing. Made in USA.
Technical Specs
| Item | Hydronic Circulating Pump |
| Manufacturer Part Number | 1EF027LF |
| Series Family | E-60 |
| Body Gasket Material | Cellulose Fiber |
| Face to Face Dimension | 11-1/2 in |
| Maximum Feet of Head | 24 ft |
| Maximum Flow Rate @ 10 feet of Head | 155 gpm |
| Maximum Flow Rate @ 15 feet of Head | 120 gpm |
| Maximum Flow Rate @ 20 Feet of Head | 90 gpm |
| Maximum Media Temperature | 225 °F |
| Maximum Operating Pressure | 175 psi |
| Mounting Location | In-Line |
| Number of Speeds | 1 |
| Horsepower | 3/4 |
| Maximum RPM | 1,725 RPM |
| Nameplate Voltage | 115/208-230VAC |
| Amps | 3.6/7.2 A |
| Phase | Single |
| Overall Height | 11.5 in |
| Overall Length | 21.75 in |
| Overall Width | 8 in |
| Pump Housing Material | Cast Iron |
| Pump Type | 3-Piece |
| Series | E611S |
| Compatible Pipe Size | 2 in |
| Connection Type | Flange |
| Impeller Material | Bronze |
| Compatible Media Type | Water |
| Minimum Media Temperature | -10 °F |
| Compatible Discharge Pipe Size | 2 in |