This is a Bell & Gossett potable water circulating pump. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. It is missing two gaskets and may be missing some hardware. There are also some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing. Made in USA.
Technical Specs
| Item | Potable Water Circulating Pump |
| Manufacturer Part Number | 1BL035LF |
| For Use With Potable Systems | Yes |
| Number of Speeds | 1 |
| Horsepower | 1/6 |
| Maximum RPM | 3,400 RPM |
| Voltage | 115VAC |
| Nameplate Voltage | 115VAC |
| For Use With | Potable Systems |
| Maximum Feet of Head | 15 ft |
| Face to Face Dimension | 8-1/2 in |
| Series | PL |
| Compatible Media Type | Water |
| Mounting Location | In-Line |
| Maximum Operating Pressure | 150 psi |
| Maximum Media Temperature | 250 °F |
| Mounting Position | Horizontal; Vertical |
| Motor Enclosure Design | Open Drip-Proof |
| Electrical Connection Type | Hardwired |
| Priming | Self-Priming |
| Pump Type | Standard |
| Maximum Flow Rate @ 5 feet of Head | 55 gpm |
| Maximum Flow Rate @ 10 feet of Head | 50 gpm |
| Maximum Flow Rate @ 15 feet of Head | 0 gpm |
| Rotor Type | Wet |
| Wetted Material | Carbon Steel; Silicon Carbide |
| Body Gasket Material | Carbon |
| Overall Length | 9.94 in |
| Overall Height | 8.5 in |
| Overall Width | 4.63 in |
| Connection Type | FNPT |
| Pipe to Flange or Union Connection Type | FNPT |
| Number of Flange Mounting Holes | 2 |
| Compatible Pipe Size | 2 in |
| Series Family | PL |
| Pump Housing Material | Bronze |
| Impeller Material | Plastic |
| Phase | Single |
| Compatible Discharge Pipe Size | 2 in |
| Frequency | 60 Hz |
| Maximum Flow Rate @ 1 Foot of Head | 68 gpm |