This is a Bell & Gossett hydronic circulating pump. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some cosmetic scuffs and scratches throughout the unit as well as some paint chipping. Please refer to the photos for more information.
This unit only includes what is photographed in the listing. Made in USA.
Technical Specs
| Item | Hydronic Circulating Pump |
| Manufacturer Part Number | 106189 |
| Number of Speeds | 1 |
| Horsepower | 1/12 |
| Maximum RPM | 1,725 RPM |
| Voltage | 115VAC |
| Face to Face Dimension | 6-3/8 in |
| Maximum Feet of Head | 8 ft |
| Maximum Flow Rate @ 5 feet of Head | 22 gpm |
| Series Family | Series 100 |
| Maximum Media Temperature | 225 °F |
| Maximum Operating Pressure | 125 psi |
| Mounting Location | In-Line |
| Overall Length | 14.88 in |
| Overall Width | 4.25 in |
| Pump Housing Material | Cast Iron |
| Pump Type | 3-Piece |
| Series | 100 NFI |
| Compatible Pipe Size | 3/4 in; 1 in; 1-1/4 in; 1-1/2 in |
| Connection Type | Flange |
| Impeller Material | Steel |
| Maximum Flow Rate @ 1 Foot of Head | 32 gpm |
| Flange or Union Included | No |
| Nameplate Voltage | 115VAC |
| Phase | Single |
| Amps | 1.75 A |
| Compatible Discharge Pipe Size | 3/4 in; 1 in; 1-1/4 in; 1-1/2 in |
| Frequency | 60 Hz |