This is a Barnes submersible fountain pump. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The screen is dented on the top. There are also some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Submersible Fountain Pump |
| Series | SFU |
| Manufacturer Part Number | SFU102-GIS |
| Pump Housing Material | Stainless Steel |
| Horsepower | 1 hp |
| RPM (Maximum) | 3,450 RPM |
| Nameplate Voltage | 230V AC |
| Frequency | 60 Hz |
| Amps | 7 A |
| Phase | Single |
| Maximum Flow Rate @ 15 Feet of Head | 100 gpm |
| Maximum Flow Rate @ 20 Feet of Head | 98 gpm |
| Maximum Feet of Head | 55 ft |
| Intake Size | 1-3/4 in |
| Discharge Size | 1-3/4 in |
| Intake Type | Screened |
| Discharge Type | GHT |
| Cord Length | 12 ft |
| Overall Height | 8.1 in |
| Overall Length | 15.8 in |
| Maximum Flow Rate @ 30 Feet of Head | 78 gpm |
| Maximum Flow Rate @ 40 Feet of Head | 58 gpm |
| Maximum Flow Rate @ 50 Feet of Head | 25 gpm |
| Overall Width | 7.8 in |
| Duty Cycle | Continuous |
| Thermal Overload Protection | Yes |
| Electrical Connection Type | Plug-In |
| Flow Rate (Maximum) | 100 gpm |
| Motor Type | PSC |
| Submersible | Yes |
| Flow Rate (Minimum) | 58 gpm |
| Impeller Material | Brass |
| Feet of Head (Minimum) | 5 ft |
| Discharge Rotation | 90° |
| Seal Material | Buna-N; Carbon; Ceramic |
| Impeller Design | Flex-Vane |
| Motor Sealing | Oil-Filled |
| Seal Type | Mechanical |