The Barnes SFU102-GIS is a heavy-duty 1 HP continuous-duty submersible fountain pump designed for decorative fountain displays and pond water circulation. Operating at 230V AC (single phase) and 3450 RPM, it delivers a maximum flow rate of up to 100 GPM with a maximum head of 55 feet. Built with a brass volute, stainless steel intake screen, and an oil-filled motor with thermal overload protection, it offers durable industrial performance.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional.
Inspection and Condition Notes:
Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Made in USA.
Technical Specs
| Item | Pond Pump |
| Series | SFU |
| Manufacturer Part Number | SFU102-GIS |
| Pump Type | Submersible Fountain Pump |
| Pump Housing Material | Stainless Steel |
| Phase | Single |
| Horsepower | 1 hp |
| Nameplate Voltage | 230V AC |
| Maximum Flow Rate @ 15 Feet of Head | 100 gpm |
| Maximum Flow Rate @ 20 Feet of Head | 98 gpm |
| Maximum Feet of Head | 55 ft |
| Intake Size | 1-3/4 in |
| Discharge Size | 1-3/4 in |
| Intake Type | Screened |
| Discharge Type | GHT |
| Cord Length | 12 ft |
| Overall Height | 8.1 in |
| Overall Length | 15.8 in |
| Maximum Flow Rate @ 30 Feet of Head | 78 gpm |
| Maximum Flow Rate @ 40 Feet of Head | 58 gpm |
| Maximum Flow Rate @ 50 Feet of Head | 25 gpm |
| Overall Width | 7.8 in |
| Duty Cycle | Continuous |
| Thermal Overload Protection | Yes |
| Electrical Connection Type | Plug-In |
| Flow Rate (Maximum) | 100 gpm |
| Motor Type | PSC |
| Submersible | Yes |
| Flow Rate (Minimum) | 58 gpm |
| Impeller Material | Brass |
| Feet of Head (Minimum) | 5 ft |
| Discharge Rotation | 90° |
| RPM (Maximum) | 3,450 RPM |
| Seal Material | Buna-N; Carbon; Ceramic |
| Impeller Design | Flex-Vane |
| Motor Sealing | Oil-Filled |
| Amps | 7 A |
| Frequency | 60 Hz |
| Seal Type | Mechanical |