This is a Banjo manual two-way ball valve. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to install the unit to fully test it. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing. Made in USA.
Technical Specs
| Item | Manual Two-Way Ball Valve |
| Manufacturer Part Number | DM150A |
| For Media | Corrosive Chemicals; Water |
| Body Material | Polypropylene |
| Valve Construction | Two-Piece |
| Valve Body Style | Straight |
| Ball Port Style | Full Port |
| Nominal Valve Size | 1-1/2 in |
| Connection Size - Side 1 | 1-1/2 in |
| Connection Gender - Side 1 | Male |
| Connection Type - Side 1 | NPT |
| Connection Size - Side 2 | 1-1/2 in |
| Connection Gender - Side 2 | Female |
| Connection Type - Side 2 | NPT |
| Max. Pressure (CWP) | 100 psi |
| Max. Pressure (Combustible Gas) | Not Rated |
| Handle | Locking Lever |
| Handle Material | Polypropylene |
| Handle Color | Yellow |
| Ball Material | Polypropylene |
| Seat Material | PTFE |
| Seal Material | FKM |
| Stem Material | Polypropylene |
| Vented Ball Valve | Non-Vented |
| Media Temp. Range | -20 °F to 150 °F |
| 3-A Compliance | Not Rated |
| Overall Length | 4.34 in |
| Handle Length | 4.38 in |
| Handle Height | 5.06 in |