This is a U.S. Motors belt drive motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. One of the mounting screws is bent. There are also some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Belt Drive Motor |
| Manufacturer Part Number | 1AGG1 |
| Motor Application | HVAC/R |
| Motor Sub Application | Belt Drive Fan/Blower |
| Motor Design | Capacitor-Start |
| Motor Enclosure Design | Open Dripproof |
| No. of Speeds | 1 |
| HP | 1/4 |
| Nameplate RPM | 1,725 |
| Voltage | 115/208-230VAC |
| Hz | 60 Hz |
| Full Load Amps | 6.2/2.8-3.1 A |
| Phase | Single |
| Duty Cycle | Continuous |
| Frame | 48YZ |
| Usable @ 208V | Yes |
| Usable @ 200V | No |
| Motor Service Factor | 1.35 |
| Motor Thermal Protection | Auto |
| Ins. Class | B |
| Max. Ambient Temp. | 104 °F |
| Motor Shaft Rotation | CW/CCW |
| Motor Mounting Type | Cradle Base |
| Motor Mounting Position | All Angle |
| Motor Frame Material | Steel |
| Shaft Dia. | 1/2 in |
| Shaft Length | 1-7/8 in |
| Motor Shaft Design | Keyed |
| Motor Bearings | Ball |
| Overall Length | 9-11/16 in |
| Length Less Shaft | 7-13/16 in |
| Body Dia. | 5-5/8 in |
| Ring to Ring Center | 7-3/8 in |
| Resilient Ring Dia. | 2-1/4 in |