This is a Weg close-coupled pump motor. It has a 3-phase design and a totally enclosed fan-cooled enclosure design. It is powered by 3 horsepower (HP) and the RPM is 1760. The voltage is 208-230/460VAC, the frequency is 60 hertz, and the full load amps is 8.5-7.7/3.8. It is continuous duty and it has a 182JM frame. The motor shaft rotation is clockwise/counter-clockwise, the shaft diameter is 7/8 of an inch, and the shaft length is 4-1/4 inches. The overall length is 17-3/8 inches.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Close-Coupled Pump Motor |
| Motor Design | 3-Phase |
| Motor Enclosure Design | Totally Enclosed Fan-Cooled |
| Body Dia. | 9.4 in |
| Bolt Circle Dia. | 5 7/8 in |
| CC Number | CC029A |
| Conduit Box Location | Exterior |
| Conduit Box Position | F1 |
| No. of Speeds | 1 |
| HP | 3 |
| Nameplate RPM | 1,760 |
| Voltage | 208-230/460VAC |
| Hz | 60 |
| Full Load Amps | 8.5-7.7/3.8 |
| Phase | Three |
| Duty Cycle | Continuous |
| Frame | 182JM |
| Height | 9 3/8 in |
| HP @ 50Hz | 3 |
| Ins. Class | F |
| Inverter Rated | Yes |
| Inverter Rating | 1000:1 |
| Length Less Shaft | 13 1/8 in |
| Max. Ambient Temp. | 40 Degrees C |
| Motor Application | Pump |
| Motor Bearings | Ball |
| Motor Efficiency Group | NEMA Premium Efficient |
| Motor Frame Material | Cast Iron |
| Motor Mounting Position | Horizontal |
| Motor Mounting Type | Face/Base |
| Motor Service Factor | 1.25 |
| Motor Shaft Design | JM Threaded |
| Motor Shaft Rotation | CW/CCW |
| Motor Thermal Protection | None |
| NEMA Design | B |
| Nominal Efficiency | 89.5 % |
| Overall Length | 17 3/8 in |
| RPM @ 50Hz | 1,445 |
| Regreasable Bearings | Regreasable Bearings |
| Service Factor @ 50Hz | 1.25 |
| Shaft Dia. | 7/8 in |
| Shaft Length | 4 1/4 in |
| Shaft Material | Carbon Steel |
| Usable @ 200V | No |
| Usable @ 208V | Yes |
| Voltage @ 50Hz | 380/400/415 |
| Voltage Compatibility | 200-230/440V AC, 200-230/460V AC, 208-230/460V AC, 460V AC |
| Weight | 94.1 lb |