Goulds Water Technology WE0311L 1/3 HP 1725 RPM 115VAC Cast Iron Effluent Pump-96848554

(You save $522.72 )

This is a Goulds Water Technology effluent pump. It is powered by 1/3 horsepower (HP) and the RPM is 1725. The voltage is 115VAC, the frequency is 60 hertz, and the amps is 10.7. It is single phase. The body and impeller are made of cast iron. The flow rate at 10 feet of head is 70.0 gallons per minute (GPM). The body diameter is 11-3/4 inches and the overall height is 16 inches. The maximum diameter of solids is 3/4 of an inch and the maximum liquid temperature is 140 degrees Fahrenheit. The discharge is 2 inches FNPT.

We have inspected this item and it powers on when plugged in. We do not have the capability to install the unit to test it any further. There are some cosmetic scuffs and scratches around the outside of the unit. Please refer to the photos for more information.

This unit does not include a float or switch. Made in USA.

Technical Specs

ItemEffluent Pump
Switch ActuationNo Switch Included
Switch Electrical ConnectionNo Switch Included
RPM1,725 RPM
Rated Voltage120VAC
Hz60 Hz
Phase - Pumps1
Body MaterialCast Iron
Impeller MaterialCast Iron
Shaft Seal Material - PumpsNitrile Rubber, Silicon Carbide, Stainless Steel
Flow Rate @ 10 Ft. of Head70 gpm
Flow Rate @ 15 Ft. of Head52 gpm
Flow Rate @ 20 Ft. of Head27 gpm
Max. Head26 ft
Min. Sump Pit Dia.18 in
Minimum Water Depth18 in
Body Dia.11 3/4 in
Width at Widest Point8 1/2 in
Overall Height16 in
Cord Length20 ft
Discharge2 in FNPT
Max. Diameter Solids3/4 in
Max. Liquid Temp.140 Degrees F
Duty CycleContinuous
Alarm IncludedNo
Thermal ProtectionThermal Protection
Nominal Voltage110V AC
Shipping Cost:
Calculated at Checkout
75.00 LBS
22.00 (in)
22.00 (in)
22.00 (in)