This is a Century direct drive blower motor. It has a permanent split capacitor design and an open air-over enclosure design. It is powered by 3/4 horse power (HP) and the RPM is 1075. The voltage is 115VAC, the frequency is 60 hertz, and the full load amps is 9.1. It is single phase. It is continuous duty and it has a 48 frame. The motor shaft rotation is clockwise/counter-clockwise, the shaft diameter is 1/2 of an inch and the shaft length is 4-1/2 inches.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. The mounting bolts are bent. There are also some cosmetic scuffs and scratches around the outside of the motor. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
Item | Direct Drive Blower Motor |
Motor Design | Permanent Split Capacitor |
Motor Enclosure Design | Open Air-Over |
Motor Mounting Type | Ring |
No. of Speeds | 3 |
HP | 3/4 |
Nameplate RPM | 1,075 |
Voltage | 115VAC |
Phase | Single |
Frame | 48 |
Shaft Dia. | 1/2 in |
Shaft Length | 4-1/2 in |
Motor Thermal Protection | Auto |
Motor Shaft Rotation | CW/CCW |
Motor Application | HVAC/R |
Motor Sub Application | Direct Drive Fan/Blower |