Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is a Marathon Motors close-coupled pump motor. It has a 3-phase design and an open dripproof enclosure design. It is powered by 5 horse power (HP) and the RPM is 1755. The voltage is 208-230/460, the frequency is 60/50 hertz, and the full load amps is 14.0-12.8/6.4. It is continuous duty and it has a 184JM frame. The motor shaft rotation is clockwise/counter-clockwise, the shaft diameter is 7/8 of an inch, and the shaft length is 4-1/4 inches.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some cosmetic scuffs and scratches around the entire unit. It also appears to be missing a shaft key. Please refer to the photos for more information.
|Item||Close-Coupled Pump Motor|
|Motor Sub Application||Close-Coupled Pump|
|Motor Enclosure Design||Open Dripproof|
|Motor Shaft Rotation||CW/CCW|
|Full Load Amps||14.0-12.8/6.4|
|Motor Mounting Type||Face/Base|
|Motor Frame Material||Rolled Steel|
|Motor Thermal Protection||None|
|Motor Service Factor||1.15|
|Max. Ambient Temp.||40 Degrees C|
|Motor Shaft Design||JM Threaded|
|Length Less Shaft||13-1/8"|
|Motor Efficiency Group||NEMA Premium Efficient|
This product comes with no warranty