Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is a Marathon Motors brake motor. It has a 3-phase design and a totally enclosed nonventilated enclosure design. It is powered by 3 horse power (HP) and the RPM is 1760. The voltage is 230/460, the frequency is 60 hertz, and the full load amps is 8.0/4.0. The brake rating is 15 feet per pound. It has a 182TC frame. The motor shaft rotation is clockwise/counter-clockwise, the shaft diameter is 1-1/8 inches, and the shaft length is 2-7/8 inches.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. It does not appear to have any damage or defects that would affect the functionality.
|Motor Application||Brake Motor|
|Motor Enclosure Design||Totally Enclosed Nonventilated|
|Full Load Amps||8.0/4.0|
|Motor Mounting Type||Rigid Base|
|Brake Rating||15 ft.-lb.|
|Motor Thermal Protection||None|
|Motor Service Factor||1.15|
|Motor Frame Material||Cast Aluminum|
|Ambient Temperature||40 Degrees C|
|Motor Shaft Rotation||CW/CCW|
|Length Less Shaft||16-13/16"|
|Motor Efficiency Group||NEMA Premium Efficient|
This product comes with no warranty