Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is a Concentric two stage hydraulic gear pump. The HP required is 20 and the input RPM is 3600. The nominal flow is 28 gallons per minute (GPM). The inlet is 1 inch NPTF and the outlet is 3/4 of an inch NPTF. The shaft diameter is 5/8 of an inch and the shaft length is 1-1/2 inches. It has a direct drive and the rotation is clockwise.
We have inspected this item and we do not have the proper equipment to fully test it. There are some cosmetic scuffs and scratches around the unit. Please refer to the photos for more information.
|Item||Hydraulic Gear Pump|
|GPM @ 1000 PSI||6.7|
|GPM @ 2000 PSI||6.3|
|GPM @ 250 PSI||28|
|Nominal Flow (GPM)||28|
|Ports (Inlet)||1" NPTF|
|Ports (Outlet)||3/4" NPTF|
|Shaft Dia. (In.)||5/8"|
|Shaft Length (In.)||1-1/2|
|Displacement @ High Pressure (cubic inches/rev.)||0.465|
|Displacement @ Low Pressure (cubic inches/rev.)||1.395|
|Drive Shaft (In.)||5/8|
|Max. PSI 1st Stage||750|
|Max. PSI 2nd Stage||3000|
|Unloading Valve Preset Pressure (psi)||650|
|Mounting Flange||SAE A|
|Application||For Presses, Log Splitters, Clamping Units and Compactors|
This product comes with no warranty