Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is a Century belt drive motor. It has a 3-phase design and a totally enclosed nonventilated enclosure design. It is powered by 1/2 horse power (HP) and the RPM is 1140. The voltage is 200-230/460, the frequency is 60 hertz, and the full load amps is 2.1-2.0/1.0. It is continuous duty and it has a 56 frame. The motor shaft rotation is clockwise/counter-clockwise, the shaft diameter is 5/8 of an inch, and the shaft length is 1-7/8 inches. The overall length is 11-1/16 inches.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some cosmetic scuffs and scratches around the unit. Please refer to the photos for more information.
|Item||Belt Drive Motor|
|Motor Sub Application||Belt Drive Fan/Blower|
|No. of Speeds||1|
|Motor Enclosure Design||Totally Enclosed Nonventilated|
|Motor Mounting Type||Cradle Base|
|Motor Mounting Position||All Angle|
|Full Load Amps||2.1-2.0/1.0|
|Motor Thermal Protection||None|
|Motor Service Factor||1.15|
|Motor Frame Material||Rolled Steel|
|Max. Ambient Temp.||40 Degrees C|
|Motor Shaft Rotation||CW/CCW|
|Length Less Shaft||9-3/16"|
|Mounting Stud Pattern||4-1/8" x 4-1/8"|
This product comes with no warranty