Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is an Ingersoll Rand industrial duty cycle air chipping hammer. The shank size is 0.680 of an inch and it has a round shank type. The stroke length is 2 inches and the blows per minute is 2300. The air inlet size is 3/8 of an inch NPT. The CFM at full load is 28.0. The overall length is 16 inches and the required pressure is 90 pounds per square inch (PSI).
We have inspected this item and we do not have the proper equipment to fully test it. It appears to be missing the bottom portion of the connection. There are also some cosmetic scuffs and scratches around the unit. Please refer to the photos for more information.
|Item - Air Hammers||Air Chipping Hammer|
|Shank Size - Air Hammers||0.680"|
|Shank Type - Air Hammers||Round|
|Duty Cycle - Air Tools||Industrial Duty|
|Blows per Minute - Air Tools||2300|
|Air Inlet Size - Air Tools||3/8" NPT|
|Average CFM @ 15 Second Run Time||7.00|
|CFM @ Full Load||28.0|
|Required Pressure||90 psi|
|Handle Type||D Type|
We do not offer a warranty for any of our products.