Honeywell MS8120F1200 175 In-Lb Torque 24VAC Direct Mount Electric Actuator

Normally Ships with 24 Business Hours
(You save $255.11 )

Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.

This is a Honeywell direct mount electric actuator. The torque is 175 inches per pound. The overall height is 10-11/16 inches, the overall width is 4 inches, and the overall depth is 3 inches. The voltage is 24VAC.

We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some cosmetic scuffs and scratches around the unit. Please refer to the photos for more information.

Technical Specifications

Item Electric Actuator
Mounting Type Direct Mount
Spring Return Yes
Shaft Type 3/8" to 1-3/8" Round or 3/8" to 11/16" Square
Torque 175 in.-lb.
Stroke Deg. 95 +/-3
Height 10-11/16"
Width 4"
Depth 3"
Switch Type 2 SPDT
Electrical Connections (2) Integral 3/8" Flexible Conduit
Signal Type On/Off
Motor Direction CW or CCW
Ambient Temp. Range -40 Degrees to 130 Degrees F
Power Consumption 45VA Driving, 10VA Holding
Timing 15 sec. Nominal @ 60 Hz, 15 sec. Spring Return
Voltage 24VAC
For Use With Valves and Dampers
Shipping Cost:
Calculated at Checkout
12.00 LBS
8.00 (in)
8.00 (in)
20.00 (in)