Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is a Goulds Water Technology straight centrifugal high head pump. It is powered by 2 horse power (HP) and the motor RPM is 3500. The voltage is 120/240VAC, the frequency is 60 hertz, and the amps is 26.0/13.8-13. It is single phase. The outlet size is 1-1/4 inches NPT and the inlet size is 1-1/2 inches NPT. The maximum head is 102 feet and the maximum pressure is 125 pounds per square inch (PSI). The best efficiency is 75 gallons per minute (GPM) at 85 feet of head. The maximum liquid temperature is 212 degrees fahrenheit and the maximum diameter of solids is 1/8 of an inch. It is continuous duty and it has a 56J frame. The overall length is 17-1/8 inches, the overall width is 8-7/8 inches, and the overall height is 9 inches.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some cosmetic scuffs and scratches around the unit. Please refer to the photos for more information.
|Item - Straight Centrifugal Pumps||Straight Centrifugal High Head Pump|
|HP - Pumps||2|
|Voltage - Pumps||120/240VAC|
|Phase - Pumps||1|
|Housing Material - Pumps||Cast Iron|
|Outlet Size - Pumps||1-1/4" NPT|
|Inlet Size - Pumps||1-1/2" NPT|
|Max. Head||102 ft.|
|Max. Pressure - Pumps||125 psi|
|Motor Enclosure - Pumps||Open Dripproof|
|Max. GPM @ Head||100 @ 66 ft.|
|Max. Dia. Solids||1/8"|
|Seal Material||Buna-N Elastomers, Carbon/Ceramic Face, 316 Stainless Steel Metal Parts|
|Max. Liquid Temp.||212 Degrees F|
|GPM of Water @ 60 Ft. of Head||104|
|GPM of Water @ 70 Ft. of Head||96|
|GPM of Water @ 80 Ft. of Head||84|
|GPM of Water @ 90 Ft. of Head||68|
|GPM of Water @ 100 Ft. of Head||32|
|Max. Specific Gravity||1.0|
|Wetted Materials||303 Stainless Steel, Carbon, Cast Iron, Bronze, Ceramic, Buna-N|
|Max. Case Pressure||125 psi|
|Inlet Pressure||55 psi|
|Port Rotation||45 Increments|
|Best Efficiency Range GPM @ Head||40 to 100 gpm @ 100 to 63 ft.|
|Best Efficiency GPM @ Head||75 @ 85 ft.|
|Min. GPM @ Head||20 @ 101 ft.|
We do not offer a warranty for any of our products.