Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is an Armstrong Pumps Inc. hot water circulating pump. It is powered by 1/12 horse power (HP) and the RPM is 1800. The voltage is 115VAC, it is single phase, and the amps is 2.40. The inlet/outlet size is 3/4 to 1-1/2 inches and the connection style is NPT/flange. The maximum flow is 25 gallons per minute (GPM) at 3 feet of head. The overall height is 6-1/2 inches, the overall lenght is 13-3/4 inches, and the overall width is 11-1/2 inches. The maximum operating pressure is 125 pounds per square inch (PSI), the maximum temperature is 225 degrees fahrenheit and the shut-off is 45 feet. The housing is made of cast iron.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some cosmetic scuffs and scratches around the unit. Please refer to the photos for more information.
|Item||Hot Water Circulating Pump|
|HVAC Circulating Pump Type||Hot Water Circulating Pump|
|Voltage - Pumps||115VAC|
|Phase - Pumps||1|
|Inlet/Outlet Size||3/4" to 1-1/2"|
|Housing Material - Pumps||Cast Iron|
|Max. GPM @ Head||25 gpm @ 3 ft.|
|Face to Face Dimension||6-1/2"|
|Best Efficiency GPM @ Head||20 gpm @ 8 ft.|
|Min. GPM @ Head||2 gpm @ 10 ft.|
|Max. Operating Pressure||125 psi|
|Max. Temp.||225 Degrees F|
|Number of Speeds||1|
|Pump Mount||In Line|
|Impeller Material||30% Glass-Filled Noryl(R)|
|Shaft Material||Stainless Steel|
|Mechanical Seal||Maintenance Free|
We do not offer a warranty for any of our products.