Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is a Weg general purpose motor. It has a 3-phase design and a totally enclosed fan-cooled enclosure design. It is powered by 3 horse power (HP) and the RPM is 3510. The voltage is 230/460, the frequency is 60 hertz, and the full load amps is 7.2/3.6. It is continuous duty and it has a 182T frame. The motor shaft rotation is clockwise/counter-clockwise, the shaft diameter is 1-1/8 inches, and the shaft length is 2-3/4 inches. The overall length is 14-7/8 inches.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. It is missing the shaft key. There are some dents on the fan casing and some of the cast iron on the frame has chipped off. There are also some cosmetic scuffs and scratches around the unit. Please refer to the photos for more information.
|Item||General Purpose Motor|
|Motor Application||General Application|
|Motor Enclosure Design||Totally Enclosed Fan-Cooled|
|Full Load Amps||7.2/3.6|
|No. of Speeds||1|
|Motor Mounting Type||Rigid Base|
|Motor Mounting Position||Horizontal|
|Motor Thermal Protection||None|
|Motor Service Factor||1.25|
|Motor Frame Material||Cast Iron|
|Max. Ambient Temp.||40 Degrees C|
|Motor Shaft Rotation||CW/CCW|
|Length Less Shaft||12-1/8"|
|Motor Shaft Design||Keyed|
|Motor Efficiency Group||NEMA Premium Efficient|