Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is a Warner Electric clutch/brake. The static torque is 30 feet per pound and the shaft diameter is 5/8 of an inch. The voltage is 90VDC, the maximum RPM is 3600, and the NEMA/IEC frame is 56C. The overall length is 6-3/4 inches and the overall width is 6-3/4 inches.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. It is missing a shaft key and the mounting hardware. There are also some cosmetic scuffs and scratches around the unit. Please refer to the photos for more information.
|Static Torque (Ft.-Lb.)||30|
|Shaft Dia. (In.)||5/8|
|Power Lead Length (In.)||30|
|Mounts On||NEMA C-Face Motor or Between Motor and Reducer|
|Brake Mouting Position||Horizontal|
|For Use With||NEMA C-Face Motor/Reducer (Not Included)|