Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is a Marathon Motors jet pump motor. It has a 3-phase design and an open dripproof enclosure design. It is powered by 2 horse power (HP) and the RPM is 3450. The voltage is 208-230/460, the frequency is 60/50 hertz, and the full load amps is 6.4-6.2/3.1. It is continuous duty and it has a 56J frame. The motor shaft rotation is clockwise/counter-clockwise, the shaft diameter is 5/8 of an inch, and the shaft length is 2-9/16 inches. The overall length is 10-15/16 inches.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some cosmetic scuffs and scratches around the unit. Please refer to the photos for more information.
|Item||Jet Pump Motor|
|Motor Sub Application||Jet Pump|
|Motor Enclosure Design||Open Dripproof|
|Motor Shaft Rotation||CW/CCW|
|Full Load Amps||6.4-6.2/3.1|
|Motor Mounting Type||Face/Base|
|Motor Mounting Position||Horizontal or Vertical Shaft Down|
|Motor Thermal Protection||None|
|Motor Service Factor||1.20|
|Max. Ambient Temp.||40 Degrees C|
|Motor Shaft Design||Threaded|
|Shaft Material||Stainless Steel|
|Motor Efficiency Group||Standard Efficient|
We do not offer a warranty for any of our products.