Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is a Marathon Motors general purpose motor. It has a 3-phase design and a totally enclosed fan-cooled enclosure design. It is powered by 5 horse power (HP) and the RPM is 1760. The voltage is 200, the frequency is 60 hertz, and the full load amps is 14.5. It is continuous duty and it has a 184T frame. The motor shaft rotation is clockwise/counter-clockwise, the shaft diameter is 1-1/8 inches, and the shaft length is 2-13/16 inches. The overall length is 15 inches.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The hook on top of the unit is bent. There are some dents around the conduit box. There are also some cosmetic scuffs and scratches around the unit. Please refer to the photos for more information.
|Item||General Purpose Motor|
|Motor Application||General Application|
|Motor Enclosure Design||Totally Enclosed Fan-Cooled|
|Full Load Amps||14.5|
|No. of Speeds||1|
|Motor Mounting Type||Rigid Base|
|Motor Mounting Position||Horizontal|
|Motor Thermal Protection||None|
|Motor Service Factor||1.15|
|Motor Frame Material||Rolled Steel||Max. Ambient Temp.||40 Degrees C||Motor Shaft Rotation||CW/CCW||Shaft Dia.||1-1/8"||Shaft Length||2-13/16"||Length Less Shaft||12-3/16"||Overall Length||15"||Motor Shaft Design||Keyed||Duty||Continuous||Motor Efficiency Group||NEMA Premium Efficient||Nominal Efficiency||89.5%||Inverter Rated||Yes|
This product comes with no warranty