Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is a Marathon Motors general purpose motor. It has a capacitor-start/run design and a totally enclosed fan-cooled enclosure design. It is powered by 3 horse power (HP) and the RPM is 1755. The voltage is 115/208-230, the frequency is 60 hertz, and the full load amps is 28.0/14.6-14.0. It is single phase. It is continuous duty and it has a 184T frame. The motor shaft rotation is clockwise/counter-clockwise, the shaft diameter is 1-1/8 inches, and the shaft length is 2-3/4 inches. The overall length is 14-15/16 inches.
We have inspected this item and we do not have the capability to fully test it. The shaft does not spin when turned by hand. There are some scuffs and scratches around the unit as well as some dents on the conduit box. Please refer to the photos for more information.
|Item||General Purpose Motor|
|Motor Application||General Application|
|Motor Enclosure Design||Totally Enclosed Fan-Cooled|
|Full Load Amps|
|No. of Speeds||1|
|Motor Mounting Type||Rigid Base|
|Motor Mounting Position||Horizontal|
|Motor Thermal Protection||None|
|Motor Service Factor||1.00|
|Motor Frame Material||Rolled Steel|
|Max. Ambient Temp.||40 Degrees C|
|Motor Shaft Rotation||CW/CCW|
|Length Less Shaft||12-1/8"|
|Motor Shaft Design||Keyed|
|Motor Efficiency Group||Standard Efficient|