Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is a Marathon Motors hazardous location motor. It has a capacitor-start design and a totally enclosed fan-cooled enclosure design. It is powered by 3/4 horse power (HP) and the RPM is 1725. The voltage is 115/208-230, the frequency is 60 hertz, andn the full load amps is 11.0/5.4-5.5. It is single phase. It is continuous duty and it has a 56 frame. The motor shaft rotation is clockwise/counter-clockwise, the shaft diameter is 5/8 of an inch and the shaft length is 1-7/8 inches. The overall length is 14-7/16 inches.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The plastic fan casing is damaged and will need to be replaced. There are also some cosmetic scuffs and scratches around the unit. Please refer to the photos for more information.
|Item||Hazardous Location Motor|
|Motor Application||Hazardous Location|
|Motor Enclosure Design||Totally Enclosed Fan-Cooled|
|Motor Shaft Rotation||CW/CCW|
|Full Load Amps|
|Motor Mounting Type||Rigid Base|
|Motor Frame Material||Rolled Steel|
|Motor Thermal Protection||Auto|
|Motor Service Factor||1.00|
|Hazardous Location Class||1 C,D / 2 E,F,G|
|Max. Ambient Temp.||40 Degrees C|
|Motor Shaft Design||Keyed|
|Length Less Shaft||12-1/2"|
|Motor Efficiency Group||Standard Efficient|