Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is a Leeson premium efficiency metric motor. It has a 3-phase design and a totally enclosed fan-cooled enclosure design. It is powered by 2 horse power (HP) and the RPM is 1725. The voltage is 230/460, the frequency is 60/50 hertz, and the full load amps is 5.4/2.7. It is continuous duty and it has a D90L frame. The motor shaft rotation is clockwise/counter-clockwise, the shaft diameter is 24mm, and the shaft length is 50mm.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. One corner of the cast iron mounting is broken off the unit. There are also some scuffs and scratches around the unit. Please refer to the photos for more information.
|Item||Premium Efficiency Metric Motor|
|Motor Application||General Application|
|Motor Enclosure Design||Totally Enclosed Fan-Cooled|
|Full Load Amps||5.4/2.7|
|Motor Mounting Type||Rigid Base|
|Motor Thermal Protection||None|
|Motor Service Factor||1.15|
|Motor Frame Material||Cast Aluminum|
|Max. Ambient Temp.||40 Degrees C|
|Motor Shaft Rotation||CW/CCW|
|Motor Efficiency Group||NEMA Premium Efficient|
We do not offer a warranty for any of our products.