Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is a Century condenser fan motor. It has a permanent split capacitor design and an open air-over enclosure design. It is powered by 1/2 horse power (HP) and the RPM is 1075. The voltage is 208-230, the frequency is 60 hertz, and the full load amps is 4.0-4.0. It has a 48Y frame and it is single phase. The shaft diameter is 1/2 of an inch and the shaft length is 4 inches. The overall length is 12-1/4 inches.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some cosmetic scuffs and scratches around the unit. Please refer to the photos for more information.
|Item||Condenser Fan Motor|
|Motor Application||OEM Replacement|
|Motor Design||Permanent Split Capacitor|
|Motor Enclosure Design||Open Air-Over|
|Full Load Amps||4.0-4.0|
|Motor Service Factor||1.00|
|Motor Mounting Type||Band|
|Motor Thermal Protection||Auto|
|Motor Shaft Rotation||CWLE|
|Max. Ambient Temp.||60 Degrees C|
|No. of Speeds||1|
|Length Less Shaft||8-1/4"|
This product comes with no warranty