Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is a Century belt drive motor. It has a 3-phase design and an open enclosure design. It is powered by 1 horse power (HP) and the RPM is 1725. The voltage is 208-230/460, the frequency is 60 hertz, and the full load amps is 3.2-3.0/1.5. It is continuous duty and it has a 56H frame. The motor shaft rotation is clockwise/counter-clockwise, the shaft diameter is 5/8 of an inch, and the shaft length is 1-7/8 inches. The overall length is 14 inches.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The mounting is slightly bent. There are also some cosmetic scuffs and scratches around the unit. Please refer to the photos for more information.
|Item||Belt Drive Motor|
|Motor Sub Application||Belt Drive Fan/Blower|
|No. of Speeds||1|
|Motor Enclosure Design||Open|
|Motor Mounting Type||Rigid Base|
|Motor Mounting Position||Horizontal|
|Full Load Amps||3.2-3.0/1.5|
|Motor Thermal Protection||Auto|
|Motor Service Factor||1.15|
|Motor Frame Material||Rolled Steel|
|Max. Ambient Temp.||40 Degrees C|
|Motor Shaft Rotation||CW/CCW|
|Motor Shaft Design||Keyed|
|Length Less Shaft||12-1/8"|
|Mounting Stud Pattern||4-3/16" x 4-3/16"|