Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is a Century close-coupled pump motor. It has a 3-phase design and a totally enclosed fan-cooled enclosure design. It is powered by 3 horse power (HP) and the RPM is 3505. The voltage is 208-230/460, the frequency is 60 hertz, and the full load amps is 8.4-7.6/3.8. It is continuous duty and it has a 182JM frame. The motor shaft rotation is clockwise/counter-clockwise, the shaft diameter is 1 inch, and the shaft length is 4-1/4 inches.
We have inspected this item and we do not have the proper equipment to fully test it. This unit appears to have been wired/used before. There are scuffs and scratches around the unit. A piece of the cast iron mounting base is also cracked off. Please refer to the photos for more information.
|Item||Close-Coupled Pump Motor|
|Motor Sub Application||Close-Coupled Pump|
|Motor Enclosure Design||Totally Enclosed Fan-Cooled|
|Motor Shaft Rotation||CW/CCW|
|Full Load Amps||8.4-7.6/3.8|
|Motor Mounting Type||Face/Base|
|Motor Frame Material||Cast Iron|
|Motor Thermal Protection||None||Motor Service Factor||1.15||Max. Ambient Temp.||40 Degrees C||Shaft Dia.||1"||Shaft Length||4-1/4"||Motor Shaft Design||JM Threaded||Length Less Shaft||13-1/4"||Overall Length||17-1/2"||Ins. Class||F||Duty||Continuous||Nominal Efficiency||85.5%||Motor Efficiency Group||Energy Efficient|
This product comes with no warranty