Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is a Robertshaw malfunction detector vibration switch. The reset type is remote electrical or manual. The voltage is 120VAC and the maximum amps is 5. The contact type is DPDT. The overall height is 3.06 inches, the overall width is 3.75 inches, and the overall length is 5.38 inches. The enclosure rating is NEMA 4, 4X and the enclosure is made of plastic/aluminum. The temperature range is -40 to 200 degrees fahrenheit.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some cosmetic scuffs and scratches around the unit. Please refer to the photos for more information.
|Reset Type||Remote Electrical or Manual|
|Frequency Range (Hz)||0 to 300|
|Horizontal Range||0 to 4.5 G|
|Vertical Range||0 to 3.5 G|
|Enclosure Rating||NEMA 4, 4X|
|Enclosure Material||Plastic Cover, Aluminum Base|
|Temperature Range (F)||-40 to 200|