Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is a Powers Controls direct acting and reverse acting pneumatic temperature transmitter. The maximum air pressure is 30 pounds per square inch (PSI) and the temperature control range is 60 to 85 degrees fahrenheit. The capillary length is 48 inches, the sensing bulb diameter is 3/8 of an inch, and the sensing bulb length is 3-1/2 inches. The overall height is 2-5/16 inches.
We have inspected this item and we do not have the proper equipment to fully test it. There are some cosmetic scuffs and scratches around the unit. Please refer to the photos for more information.
|Item||Pneumatic Temperature Transmitter|
|Action Type - Pneumatic Thermostats||Direct Acting and Reverse Acting|
|Max. Air Pressure||30 psi|
|Max. Ambient Temp.||230 Degrees F|
|Temp. Control Range||60 Degrees to 85 Degrees F|
|Output Pressure Range||3 to 15 psi|
|Sensing Bulb Dia.||3/8"|
|Sensing Bulb Length||3-1/2"|
|Control Air Pressure||18 to 25 psi|
|Air Connections||Barbed fitting for 1/4" and OD Plastic Tubing|
|Air Consumption||25 scfm|
We do not offer a warranty for any of our products.