Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is an Acorn elliptical wash fountain. It is made of stainless steel and vinylclad galvanized steel. It is black and silver in color. The operating pressure range is 30-120 pounds per square inch (PSI) and the flow rate is 0.50 gallons per minute (GPM). The water connectino is 1/2 of an inch and the connection drain is 1-1/2 inches. The overall length is 27-3/4 inches, and the overall height is 38-1/2 inches. The basin height is 34 inches and the basin depth is 4-1/2 inches.
We have inspected this item and we do not have the proper equipment to fully test it. The mounting is bent and it does not sit flat on the ground/floor. There are also some cosmetic scuffs and scratches around the unit. Please refer to the photos for more information.
|Material of Construction||Stainless Steel, Vinylclad Galvanized Steel|
|Color||Black and Silver|
|Operation Type||Foot Pushbutton|
|Operating PSI Range||30-120|
|Flow Rate (GPM)||0.50|
|Water Connection (In.)||1/2|
|Connection Drain (In.)||1-1/2|
|Drain Type||Wall Outlet|
|Overall Length (In.)||27-3/4|
|Overall Width (In.)||17|
|Overall Height (In.)||38-1/2|
|Basin Height (In.)||34|
|Basin Depth (In.)||4-1/2|
We do not offer a warranty for any of our products.