Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is a Qmark electric unit heater. The voltage is 208VAC, the frequency is 60 hertz, and the amps AC is 24.0/13.9. It can be mounted vertically or horizontally. The temperature rise is 45 degrees fahrenheit, the air flow is 350 cubic feet per minute (CFM), and the BtuH is 17,000. The overall width is 14 inches, the overall depth is 7-1/2 inches, and the overall height is 16 inches. The horizontal air throw is 12 feet and the vertical floor coverage is 9 feet. The housing is made of 20 gauge steel.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some slight dents around the unit. There are also some cosmetic scuffs and scratches around the unit. Please refer to the photos for more information.
|Item||Electric Unit Heater|
|Electric Heater Item||Electric Unit Heater|
|Electric Heater Phase||1/3|
|Heater Mounting Type||Vertical or Horizontal|
|Temp. Rise||45 Degrees F|
|Air Flow||350 cfm|
|Depth||7-1/2"||Height||16"||Horizontal Air Throw||12 ft.||Vertical Floor Coverage||9 ft.||Vertical Mounting H||9 ft.||Housing Material||20 ga. Steel||Housing Finish||Polyester Powder Coated||Contactor Coil Voltage||208||Features||Enclosed Motor, Adjustable Louvers, Fan-Delay, Auto Reset|
This product comes with no warranty