Please review the entire description and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. We use the "New Other" category because, to our knowledge, the items are new unless otherwise specified in the description but may have have some imperfections. Please contact us before purchasing if you have any questions.
This is an Air Systems International venturi style pneumatic air blower. The inlet connection is 1 inch NPT, the base diameter is 11-1/4 inches, and the overall length is 44 inches. The maximum inlet pressure is 140 pounds per square inch (PSI). The base is made of cast aluminum and the housing is made of galvanized steel.
We have inspected this item and we do not have the proper equipment to fully test it. There are some slight bends around the edge of the unit. There are also some cosmetic scuffs and scratches around the unit. Please refer to the photos for more information.
|Item||Venturi Style Pneumatic Air Blower|
|Inlet Connection||1" NPT|
|Max. Inlet Pressure||140 psi|
|Air Consumed @ 50 PSIG||76 cfm|
|Air Consumed @ 70 PSIG||99 cfm|
|Air Consumed @ 90 PSIG||127 cfm|
|Total Air Flow @ 50 PSIG||2770 cfm|
|Total Air Flow @ 70 PSIG||3340 cfm|
|Total Air Flow @ 90 PSIG||3752 cfm|
|Base Material||Cast Aluminum|
|Housing Material||Galvanized Steel|
|Application||Ventilation with Compressed Air or Steam of Hazardous or Explosive Vapors|